Scale Prevention Systems
GO GREEN WITH MID ATLANTIC WATER SCALE PREVENTION SYSTEM.
The Mid Atlantic Water Scale Prevention System features
Filtersorb SP filter media to first remove the already existing scale from pipes and heat exchanger surfaces (descaling effect) and further to protect the system from future formation of scale (scale protection effect).
Filtersorb SP is based on a completely new technology. In this process the chemical structure of scale forming minerals is changed. This technology is so effective that it requires a contact time of only seconds.
The media is used in an up flow system, therefore only an in-out head is needed. The media transforms the dissolved calcium carbonate (temporary hardness) into non-charged, neutral chemical bonds. These bonds are completely stable and cannot attach to any surfaces. The chemical bonds are rinsed away by the water flow. The size of the bonds is so small (in the range of nano-meters) that they can only be seen with a microscope. Therefore the effect is the same as if the water was free of temporary hardness (calcium carbonate). The chemical structures are heat resistant and do not fall apart.
Benefits of a Scale Prevention System
- SALT FREE - No Salt to Buy.
- No Backwash, No Wasted Water
- No Electrical Hook Up
- No Moving Parts
- No Slippery Water
- 10 Year Warranty
- Easy to Install
- Built-in Bypass Included with Each System
Extend the life of your Filtersorb system with a Dosing Softener
Mid Atlantic Water uses Vortech™ Tanks.
Think Green
In order to regain a softener's or filter's ability to remove contaminants its control valve must be able to go into a backwash cycle to effectively "clean" the media before it can be regenerated. Traditional systems produce large amounts of waste water during the backwash process and consume a high volume of salt used to condition the water. Vortech™ water softeners and filters reduce backwash water and frequency by 30% and reduce salt consumption, reducing the impact on the environment.
Why Vortech™?
Vortech™ distribution systems utilize a more efficient distributor plate design to reduce backwash and improve system efficiency compared to traditional cone & gravel systems. This unique design provides greater "lift" and "action" throughout the entire width of the mineral tank during a backwash cycle, whereas traditional cone and gravel systems channel up through the media causing areas of very limited movement. In addition, because Vortech™ does not utilize gravel, it costs less to ship due to its
lighter weight.
