Our 2 most popular filtration systems, the 10x54 non-backwashing Acid Neutralizer, and Filtersorb 10 Scale Prevention System. Eliminate acidic water as well as hardwater with our dual tank system. No backwash, no salt, no electric, can easily be installed anywhere. Both units are 10x54 polyglass Vortech tanks, with media platform built into the bottom of the tank, no gravel bedding needed and better flow rates. You save money by purchasing these units together, instead of seperately.
GO GREEN WITH THE NON-BACKWASHING ACID NEUTRALIZER FROM MID ATLANTIC WATER
How A Non-Backwashing Acid Neutralizer Works.
As water enters through the valve, it flows down the water distribution tube, it is then evenly dispersed through a distribution basket at the bottom of the distribution tube, and then flows upward through the media bed, to the main household supply line This allows your household water supply maximum contact time with the neutralizing media, and eliminates channeling of the media bed as well as raising the PH in your household water supply to an acceptable level.
Benefits of A Non-Backwashing Acid Neutralizer
Threaded PVC connectors make installation easy
No Backwash, which conserves water, and extends the life of your well pump, great for low yielding wells.
Eliminates corrosion of your plumbing and water-using appliances.
No channeling of the media bed.
No electrical hookup needed.
Can be installed anywhere.
Upper distributor basket to keep media from escaping the filter tank
GO GREEN WITH MID ATLANTIC WATER SCALE PREVENTION SYSTEM.
The Mid Atlantic Water Scale Prevention System features Filtersorb SP filter media to first remove the already existing scale from pipes and heat exchanger surfaces (descaling effect) and further to protect the system from future formation of scale (scale protection effect).
Filtersorb SP is based on a completely new technology. In this process the chemical structure of scale forming minerals is changed. This technology is so effective that it requires a contact time of only seconds.
The media is used in an up flow system, therefore only an in-out head is needed. The media transforms the dissolved calcium carbonate (temporary hardness) into non-charged, neutral chemical bonds. These bonds are completely stable and cannot attach to any surfaces. The chemical bonds are rinsed away by the water flow. The size of the bonds is so small (in the range of nano-meters) that they can only be seen with a microscope. Therefore the effect is the same as if the water was free of temporary hardness (calcium carbonate). The chemical structures are heat resistant and do not fall apart.
Benefits of a Scale Prevention System
SALT FREE - No Salt to Buy.
No Backwash, No Wasted Water
No Electrical Hook Up
No Moving Parts
No Slippery Water
10 Year Warranty
Easy to Install
Built-in Bypass Included with Each System
Mid Atlantic Water uses Vortech™ Tanks.
Think Green
In order to regain a softener's or filter's ability to remove contaminants its control valve must be able to go into a backwash cycle to effectively "clean" the media before it can be regenerated. Traditional systems produce large amounts of waste water during the backwash process and consume a high volume of salt used to condition the water. Vortech™ water softeners and filters reduce backwash water and frequency by 30% and reduce salt consumption, reducing the impact on the environment.
Why Vortech™?
Vortech™ distribution systems utilize a more efficient distributor plate design to reduce backwash and improve system efficiency compared to traditional cone & gravel systems. This unique design provides greater "lift" and "action" throughout the entire width of the mineral tank during a backwash cycle, whereas traditional cone and gravel systems channel up through the media causing areas of very limited movement. In addition, because Vortech™ does not utilize gravel, it costs less to ship due to its
lighter weight.
