10x54 Non-Backwashing Acid Neutralizer with Built-In Bypass
Our 10X54 Non-Backwashing Acid Neutralizer is designed to raise your PH using food grade calcium, called calcite or PH Neutralizer As water passes through the unit, it dissolves the calcite and becomes neutral eliminating corrosion of your plumbing and water using appliances. As with any Acid Neutralizer you will need to service this system every 6 - 12 months depending upon your water usage and PH level. You can purchase the media at your local plumbing supply house.
Best of all is the price, our system comes to you ready for installation for only $499.00 (regular price) with FREE SHIPPING.
Installation is available to consumers in our service areas in parts of Maryland and Pennsylvania for a total cost of $799.00. Contact us for further information.
Specs:
Large Fillport for Easy Maintenance.
Upper distributor basket to keep media from escaping the filter tank
1.5 cubic Foot Capacity.
No Moving Parts
No Backwash, So You Conserve Water, and No Drain Needed.
No Need For Electric.
5 Year Valve Warranty
10 Year Tank Warranty
Easy to Install. Can Be Installed As An Upflow, Or A Downflow.
13x54 Non-Backwashing Acid Neutralizer with Built-In Bypass
Alternatively, we offer a 13x54 version of this acid neutralizer for only $699.00 with FREE SHIPPING. Or, for our local customers in Maryland and parts of Pennsylvania this unit sells for $995.00 installed. You may purchase this unit right from our website, or contact us for further information or installation.
How A Non-Backwashing Acid Neutralizer Works.
As water enters through the valve, it flows down the water distribution tube, it is then evenly dispersed through a distribution basket at the bottom of the distribution tube, and then flows upward through the media bed, to the main household supply line This allows your household water supply maximum contact time with the neutralizing media, and eliminates channeling of the media bed as well as raising the PH in your household water supply to an acceptable level.
Benefits of A Non-Backwashing Acid Neutralizer
Threaded PVC connectors make installation easy
No Backwash, which conserves water, and extends the life of your well pump, great for low yielding wells.
Eliminates corrosion of your plumbing and water-using appliances.
No channeling of the media bed.
No electrical hookup needed.
Can be installed anywhere.
Upper distributor basket to keep media from escaping the filter tank
Think Green
In order to regain a softener's or filter's ability to remove contaminants its control valve must be able to go into a backwash cycle to effectively "clean" the media before it can be regenerated. Traditional systems produce large amounts of waste water during the backwash process and consume a high volume of salt used to condition the water. Vortech™ water softeners and filters reduce backwash water and frequency by 30% and reduce salt consumption, reducing the impact on the environment.
Why Vortech™?
Vortech™ distribution systems utilize a more efficient distributor plate design to reduce backwash and improve system efficiency compared to traditional cone & gravel systems. This unique design provides greater "lift" and "action" throughout the entire width of the mineral tank during a backwash cycle, whereas traditional cone and gravel systems channel up through the media causing areas of very limited movement. In addition, because Vortech™ does not utilize gravel, it costs less to ship due to its
lighter weight.
All Acid Neutralizers are available in Almond or Black colors.
Specs:
